Set Up My Watch
Illustration of the Rolex calibre 3235 dial (simplified drawing, not a product photo)
Rolex

How to set a Rolex Datejust or Submariner Date (3235)

Datejust, Submariner Date, Yacht-Master
Verified Time Date Self-winding

Short answer: To set the time and date on a Rolex Datejust, Submariner Date or Yacht-Master (calibre 3235), unscrew the crown first. Unscrewed is position 1, where it winds: clockwise, at least 25 turns if it has stopped. Pull it to position 2 for the date and to position 3 for the time, where the seconds hand stops. Then press the crown in lightly and screw it back down against the case.

At a glance

Calibre3235, self-winding, about 70 hours of power reserve (Rolex model pages)
Crown0 = screwed down, 1 = unscrewed, for winding, 2 = date, 3 = time with the seconds hand stopped
Winding from a stopAt least 25 clockwise turns at position 1. Turning the other way has no effect.
DateRapid setting at position 2, and the watch keeps running. Direction depends on the model.
Date windowRolex's user guide gives no time window for setting the date.
WaterWaterproof only with the crown screwed down. Rolex: never unscrew it under water.
ModelsDatejust 36 and 41, Submariner Date, Yacht-Master 40 and 42

What do you need to set?

Want the drawing to move with you? The interactive guide steps through each press and turn.Open the interactive Rolex 3235 guide →
Date is wrong

Set the date

  1. 1

    Unscrew the crown, pull it to position 2

    Unscrew it completely, then pull it out to the first notch. The watch keeps running while you set the date.

    Rolex calibre 3235 drawing: crown pulled out to position 2, the date highlighted
  2. 2

    Turn until today's date shows

    Rolex says clockwise or counter-clockwise depending on the model. The other way does nothing or winds the watch. On the Submariner Date it is clockwise.

    Rolex calibre 3235 drawing: crown in position 2, turned either way, the date highlighted
    Set the time first, so the date changes at midnight and not at noon.
  3. 3

    Back to position 1, screw it down

    Press lightly on the crown and screw it clockwise against the case. Rolex's user guide gives no time window for setting the date.

    Rolex calibre 3235 drawing: crown pushed back in to position 0
Time is wrong

Set the time

  1. 1

    Unscrew the crown, pull it to position 3

    Unscrew it completely, then pull it out to the second notch. The seconds hand stops, so you can set the time to the second.

    Rolex calibre 3235 drawing: crown pulled out to position 3
  2. 2

    Hour hand to 12, then the right time

    Turn the crown either way. Bring the hour hand to 12 first: if the date changes, it is midnight. That is how Rolex suggests telling a.m. from p.m.

    Rolex calibre 3235 drawing: crown in position 3, turned either way, the hands highlighted
    No date change at 12? That was noon. Go round another 12 hours.
  3. 3

    Back to position 1, screw it down

    Push the crown in to position 1, press lightly on it and screw it clockwise against the case. Never unscrew the crown under water.

    Rolex calibre 3235 drawing: crown pushed back in to position 0
Watch stopped

Start it when it has stopped

  1. 1

    Unscrew the crown completely

    Unscrew the winding crown until it is free of the case. That is position 1, for winding.

    Rolex calibre 3235 drawing: crown pulled out to position 1
  2. 2

    Turn it clockwise at least 25 times

    Rolex asks for a minimum of 25 turns to partly wind it. Turning the other way has no effect.

    Rolex calibre 3235 drawing: crown in position 1, turned forwards
    After that it winds itself for as long as it is on the wrist.
  3. 3

    Set the time, then the date

    Rolex's order after a stop: watch for the date change at midnight while you set the time in position 3, then set the date in position 2. Both are below.

    Rolex calibre 3235 drawing: crown pulled out to position 3, the hands highlighted
  4. 4

    Screw the crown down

    Press lightly on the crown and screw it clockwise against the case. Screwed down is position 0, the only waterproof one.

    Rolex calibre 3235 drawing: crown pushed back in to position 0

What owners run into

How it differs from similar watches

Every model in the list below sets up the same way. Rolex prints the same four crown positions and the same order in the Datejust, Submariner and Yacht-Master guides. What changes is the crown type, the bezel and the depth rating.

Models with calibre 3235

The Datejust, Submariner Date and Yacht-Master below all use calibre 3235 and set their time and date the same way. I only list a model here when its own page on rolex.com names calibre 3235 and links one of those three guides. The references are the ones I checked there. Each one comes in more dial and bracelet versions than I list. The Sea-Dweller and Deepsea use calibre 3235 too, but their pages don't link a user guide, so I have left them out for now.

Illustration of the Rolex Datejust 41 dial (simplified drawing, not a product photo)

Rolex Datejust 41

Ref. 126300, 126331, 126333, 126334 · cal. 3235

Rolex's Datejust guide. Twinlock screw-down crown, waterproof to 100 m (330 ft) once it is screwed down. Rolex gives the date direction as clockwise or counter-clockwise depending on the model, so try one way and then the other.

Illustration of the Rolex Datejust 36 dial (simplified drawing, not a product photo)

Rolex Datejust 36

Ref. 126200, 126201, 126203, 126231, 126233, 126234, 126284RBR · cal. 3235

Same guide, crown and steps as the Datejust 41, in the smaller case. The Datejust 31 is not here. Its rolex.com page (ref. 278240) lists calibre 2236.

Illustration of the Rolex Submariner Date dial (simplified drawing, not a product photo)

Rolex Submariner Date

Ref. 126610LN, 126610LV, 126613LB, 126613LN, 126618LB, 126618LN · cal. 3235

Rolex's Submariner guide. Triplock screw-down crown, waterproof to 300 m (1,000 ft). The date sets clockwise; the other way has no effect. The bezel turns counter-clockwise only: before a dive, put its triangle opposite the minute hand. The Submariner without a date is not on this page. Its rolex.com page (ref. 124060) lists calibre 3230.

Illustration of the Rolex Yacht-Master 40 dial (simplified drawing, not a product photo)

Rolex Yacht-Master 40

Ref. 126621, 126622, 126655 · cal. 3235

Rolex's Yacht-Master guide. Triplock crown with a crown guard, waterproof to 100 m (330 ft), and a 60-minute bezel that turns both ways. Date direction: clockwise or counter-clockwise depending on the model.

Illustration of the Rolex Yacht-Master 42 dial (simplified drawing, not a product photo)

Rolex Yacht-Master 42

Ref. 226627, 226658, 226659 · cal. 3235

Same guide, crown and bezel as the Yacht-Master 40. Ref. 226627 is the RLX titanium version. The Yacht-Master 37 is not on this page. Its rolex.com page (ref. 268622) lists calibre 2236.

Quick answers

How many turns does a Rolex 3235 need to wind it?

At least 25 clockwise turns with the crown unscrewed, at position 1, if it has stopped. After that, wearing it keeps it wound.

Which way do I turn the crown to set the date on a Rolex?

Rolex says clockwise or counter-clockwise depending on the model. The other way does nothing or winds the watch. On the Submariner Date it is clockwise.

Is there a time when I shouldn't change the date on a 3235?

Rolex's user guide does not give one. See step 3 of setting the date.

Does the seconds hand stop when I set the time?

Yes. At position 3 it stops, so you can set the watch to the second.

How long does a Rolex 3235 run off the wrist?

About 70 hours, according to Rolex's model pages.

Sources

ROLEX, DATEJUST, SUBMARINER and YACHT-MASTER are trademarks of Rolex SA.